Uniden BCT15 - Manual (Page 49)

49
A Look at The LCD Display
PRI :
This icon turns on while the Priority Scan works and this blinks while Priority Plus
works.
GPS :
This icon appears when the scanner receives GPS data.
AM / FM / NFM / FMB / WFM :
These icons show the modulation type. “AM”, “FM”, “NFM”, “FMB” or “WFM” will
appear.
ATT :
This icon appears on the Channel that is Attenuator On.
C67.0 / DCS023 / etc. :
This area displays the information of CTCSS/DCS.
WX :
This icon turns on while the Weather Alert Priority Scan works.
f
(Function icon) :
This icon appears while Function Mode.
Function Mode does not have a timeout when this icon blinks.
P
(Priority Channel) :
This icon appears when the channel set to “Priority On”.
M
(Alert Mute) :
This icon blinks when the scanner is in temporary Alert Mute.
This icon appears when the scanner is in continuous Alert Mute.
S
(Signal Indicator) :
This icon shows strength of the signal from 0 to 5.
C
(Close Call Pri) :
This icon appears when the Close Call Mode is CC Pri Mode.
This blinks while Close Call Only Mode or when the scanner detects the Close
Call.
c
(Close Call DND) :
This icon appears when the Close Call Mode is CC DND Mode.
This is a reverse display of Close Call Pri icon.