Uniden BCT15 - Manual (Page 87)

87
Programming Your Scanner
MU2: Motorola UHF
EDW: EDACS Wide
EDN: EDACS Narrow
Following these steps to change the system name.
[MENU] Program System
F
Select a trunked system
F
Edit Site
F
Select a Site
F
Edit Name
F
To enter a letter, turn the Scroll Control until the character you want appears. To
enter a decimal point, press [.No]. To move the cursor to the left, press [4]. To
move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [E
YES
] or
F .
[MENU] Program System
F
Select a trunked system
F
Edit Site
F
Select a Site
F
Set Quick Key
F
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press
F .
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system’s Quick Key must be activated and the system must
be unlocked.
[MENU] Program System
F
Select a trunked system
F
Setting the Site Quick Key MESL
Setting the Site Startup Key MESL