Ultimate Technology 600 POS - Manual (Page 31)

Series 600 POS Keyboard
26
Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s) Operation Normal Indication Remarks
50
Disable Keys
While Cash
Drawer Open
The Series 600 Keyboard can be programmed to become disabled while 1 or more cash
drawer(s) is open.
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 50.
LED (2) flashes.
2. On the Series 600 keypad, type the desired funciton listed below.
0 = Send on change or transition*
1 = Disable if cash drawer 1 is open
2 = Disable if cash drawer 2 is open
3 – disable if cash drawer 1 or 2 is open
This command is used to disable key codes coming from the keyboard if the cash
drawer(s) are open. If this command is given a non-zero value and the specified drawer(s)
is opened, the SECURE LED will light and all key codes will be ignored, including RS232,
MSR, AUX keyboard and keyswitch. Keyboard commands will still be allowed.
70
Indicator LED
Mode (70)
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 70.
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select LED mode of operation.
LED Mode
0 = Command mode of operation*
1 = PC mode of operation
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 keyboard numeric keypad or by swiping the Program Card.