Ultimate Technology 600 POS - Manual (Page 49)

Series 600 POS Keyboard
44
Table 5. Remote Programming Mode Commands
OP CODE
(HEX)
MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT
A4 NOTES
Used to enter up to 40 characters of notes
into RAM. Useful for recording keyboard
version and date, etc.
COMMAND: A4xxxx-xxxx<CR>
A4
= Op Code
xx = Note (max of 40 Characters)
<CR> = terminate command (0D hex)
ACKNOWLEDGEMENT: NONE
A5 SPCDEF
Define where SHIFT, CONTROL, and
ALTERNATE keys are located on auxiliary
keyboard.
COMMAND: A5xCxDx<CR>
A5
= Op Code
x = 1 right shift
= 2 left shift
= 3 right control
= 4 left control
= 5 right alternate
= 6 left alternate
Cx = key number
(refer to Appendix D)
Dx = key number
(refer to Appendix D)
<CR> = terminate command (0D hex)
ACKNOWLEDGEMENT: NONE
A6 CLICKED
Turns keyboard key audible click on or off.
COMMAND: A6x<CR>
A6
= Op Code
x 0 = off
1 = on
<CR> = terminate command (0D hex)
ACKNOWLEDGEMENT: NONE