Ultimate Technology 600 POS - Manual (Page 57)

Series 600 POS Keyboard
52
Table 5. Remote Programming Mode Commands
OP CODE
(HEX)
MNEMONIC/DESCRIPTION COMMAND/ACKNOWLEDGEMENT
BC CDSTATUS
Send cash drawer macros for open and
closed drawer.
COMMAND: BCp<CR>
BC
= Op Code
p = selection control
<CR> = terminate command (0D hex)
Selection control:
A
= cash drawer 1 macros
B = cash drawer 2 macros
C = cash drawer 1 and 2 macros
ACKNOWLEDGEMENT:
Send back Macros for request.
BD PORTE
Disables all data applied from the selected
port.
COMMAND: BDpx<CR>
BD
= Op Code
p = port
0 = serial 0 main
1 = serial 1 AUX
2 = keyboard main
3 = keyboard AUX
x = selection control
1 = enable data
0 = disable data
<CR> = terminate command (0D hex)
ACKNOWLEDGEMENT: NONE