Ultimate Technology 600 POS - Manual (Page 32)

Series 600 POS Keyboard
27
Table 2. Local Mode Programming Instructions
* = Default Settings
Function Code(s) Operation Normal Indication Remarks
71
Enable/Disable
Keyboard Key
Clicks (71)
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 71.
LED (2) turns on.
2. At Series 600 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select key click tone mode of operation.
Key Click Mode
0 = off
1 = on*
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.
80
81
Define Left SHIFT
Key
(80) and Right
SHIFT Key (81)
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 80 or 81.
LED (2) flashes.
2. At auxiliary keyboard, hit the left SHIFT key if programming Function Code 80 or right
SHIFT key if programming Function Code 81.
3. At the Series 600 Keyboard, press Enter.
LED (2) turns off.
4. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.
82
83
Define Left
CONTROL Key (82)
and Right
CONTROL Key (83)
1. Swipe Program Card. While in programming mode, at the Series 600 Keyboard
numeric keypad, enter Function Code 82 or 83.
LED (2) flashes.
2. At auxiliary keyboard, hit the left CONTROL key if programming Function Code 82 or
right CONTROL key if programming Function Code 83.
3. At the Series 600 Keyboard, press Enter.
LED (2) turns off.
4. Program the next function code or exit programming mode by entering 99 on Series
600 Keyboard numeric keypad or by swiping the Program Card.