Xantrex Technology ENERGY HW 1000 - Manual (Page 8)

Safety
vi 975-0467-01-01
6. Do not disassemble the Freedom HW . It contains no user-serviceable
parts. See Warranty for instructions on obtaining service. Attempting
to service the
Freedom HW yourself may result in a risk of electrical
shock or fire and will void your warranty. Internal capacitors remain
charged after all power is disconnected.
7. To reduce the risk of electrical shock, disconnect both AC and DC
power from the Freedom HW before attempting any maintenance or
cleaning or working on any circuits connected to the Freedom HW .
Turning off controls will not reduce this risk.
8. The Freedom HW must be provided with an equipment-grounding
conductor connected to the AC input ground.
1. Working in the vicinity of batteries is dangerous. Batteries generate
explosive gases during normal operation. Therefore, it is of utmost
importance that each time before servicing the unit in the vicinity of
the battery, that you read this manual and follow the instructions
exactly.
2. This equipment contains components which tend to produce arcs or
sparks. To prevent fire or explosion, do not install the Freedom HW
in compartments containing batteries or flammable materials, or in
locations that require ignition-protected equipment. This includes any
space containing gasoline-powered machinery, fuel tanks, as well as
joints, fittings, or other connections between components of the fuel
system.
3. To reduce the risk of battery explosion, follow these instructions and
those published by the battery manufacturer and the manufacturer of
any unit you intend to use in the vicinity of the battery.
WARNING: Explosion hazard