VEGA VEGAPULS 51V…54V - Manual (Page 44)

44 VEGAPULS 51 V … 54 V
6 Set-up
6.1 Adjustment structure
Series 50 radar sensors can be adjusted
with
- PC (adjustment program VVO)
- detachable adjustment module MINICOM
- signal conditioning instrument VEGAMET.
The adjustment must be only carried out with
one adjustment medium.
Adjustment program VVO
With the adjustment program VVO (VEGA Vi-
sual Operating System) on the PC you can
adjust the radar sensors very comfortably.
The PC communicates via the interface
adapter VEGACONNECT 2 or the standard
RS232 interface cable digitally with the
sensor. The adjustment can be hence carried
out directly on the sensor, in any individual
position of the signal line or on the
processing system VEGAMET/VEGALOG.
Note:
The adjustment with PC via the interface
adapter VEGACONNECT 2 directly on the
sensor or on the signal line enables only the
"parameter adjustment" and corresponds to
the adjustment with PC on VEGAMET or
VEGALOG on the following pages.
Adjustments to "
Configuration" however are
not possible when the VEGACONNECT 2 is
connected directly to the sensor or the signal
line and hence not described separately in
this operating instruction.
Signal conditioning instrument VEGAMET
The signal conditioning instrument VEGAMET
enables with the 6-key adjustment field with
text display the parameter adjustment in the
same functional volume than the adjustment
program VVO on the PC.
Adjustment module MINICOM
With the adjustment module MINICOM you
can adjust in the sensor or in the external
indicating instrument VEGADIS 50. The
adjustment module enables with the 6-key
adjustment field with text display the
parameter adjustment in the same functional
volume than the adjustment program VVO or
the 6-key adjustment field with text display on
the signal conditioning instrument VEGAMET.
The configuration adjustments however are
only possible with the adjustment program
VVO or the 6-key adjustment field with text
display on the signal conditioning instrument
VEGAMET.
The adjustment is always the same, whether
you set-up a measuring sytem (unit
consisting of sensor and signal conditioning
instrument VEGAMET or sensor and
processing system VEGALOG) with the
adjustment software VVO, with the signal
conditioning instrument or with the adjustment
module MINICOM:
- first of all configure in the menu "Configuration "Configuration "Configuration "Configuration "Configuration"
a meas. system and
- carry out the parameter adjustment of the
sensors in the menu " Instrument data Instrument data Instrument data Instrument data Instrument data".
Set-up - Adjustment structure