VEGA VEGAPULS 51V…54V - Manual (Page 86)

86 VEGAPULS 51 V … 54 V
• Quit the menu with " OK OK OK OK OK".
• Confirm the message with " OK OK OK OK OK", and your
individual linearisation curve will be saved
in the sensor.
Again in the menu window " Conditioning" you
can enter with the menu point " Integration
time" a measured value integration. This is
useful for fluctuating product surfaces to
avoid a permanently changing measured
value indication and output.
As a standard feature an integration time of
0 seconds is adjusted.
• Quit the menu with " OK OK OK OK OK".
• Quit the menu window "Instrument data
parameter adjustment" with " OK OK OK OK OK".
Outputs
• Choose in the main menu window " Instru- Instru- Instru- Instru- Instru-
ment data/Parameter adjustment ment data/Parameter adjustment ment data/Parameter adjustment ment data/Parameter adjustment ment data/Parameter adjustment", and then
the menu point "
Outputs Outputs Outputs Outputs Outputs".
You are in the menu window " Outputs".
• Click to " Current output Current output Current output Current output Current output" to adjust the signal
mode of the 0/4…20 mA output signal.
• If you have made adjustments in the menu
window "Current output", click to
"
Save Save Save Save Save".
• If you want to keep the adjustments
unchanged, click to " Quit Quit Quit Quit Quit".
You are now again in the menu window
"
Outputs". With the menu point "Display of
measured value" you scale the sensor
indication or probably additional indicating
instruments connected to VEGALOG (see
also page 59 right column).
• Click in the menu window " Outputs" to
"Quit Quit Quit Quit Quit" and you are in the menu window "In-
strument data parameter adjustment"
• Click in the menu window "Instrument data
parameter adjustment" again to "Quit Quit Quit Quit Quit".
Set-up - Adjustment with the PC on VEGALOG