VEGA VEGAPULS 51V…54V - Manual (Page 77)

VEGAPULS 51 V … 54 V 77
Set-up - Adjustment with the PC on VEGALOG
• Enter under name " VEGA VEGA VEGA VEGA VEGA".
• Also enter under password "VEGA VEGA VEGA VEGA VEGA".
The adjustment program, called in the
following VVO, contacts the connected meas.
system/sensor …… and shows after a few
seconds if and with which meas. system/
sensors a connection exists.
Note:
If you do not get a sensor connection, check
the following:
- is the processing system powered with
supply voltage?
- do you erroneously use a wrong RS232-
cable instead of the VEGA RS-232-
connection cable?
If VVO (adjustment software) contacts the
processing system for the first time, you are
asked if the data should be transferred from
the processing system to the PC.
• Click to " Y Y Y Y Yes es es es es"
When you connect VVO to a VEGALOG
where data have been already saved, a
message is displayed whether you want to
transfer the saved data from the PC to
VEGALOG or whether the data of VEGALOG
should be transferred to the PC.
• Click to " OK OK OK OK OK", and you are in the main menu main menu main menu main menu main menu
window window window window window.
The preadjusted identification can be
modified later in the menu "
Configuration/Pro-
gram/User access" (see page 47).