VEGA VEGAPULS 51V…54V - Manual (Page 62)

62 VEGAPULS 51 V … 54 V
Backup
• Click to
" Services/Backup/Sensors Services/Backup/Sensors Services/Backup/Sensors Services/Backup/Sensors Services/Backup/Sensors"
In the menu window " Backup" the sensor with
the serial number is displayed. You can save
the sensor individually or in groups with all
adjustments in a directory of your choice on
your PC. In addition you can add a short note
to each backup.
You also save the adjustments of the signal
conditioning instrument VEGAMET:
Saved sensor data can be transferred later
to other sensors. If you have e.g. a system
with several of the same storage vessels and
identical sensors, it is sufficient to configure
one sensor and then transfer to the other
sensors.
• Choose the menu """"" Services/Restore Services/Restore Services/Restore Services/Restore Services/Restore
configuration/Sensors configuration/Sensors configuration/Sensors configuration/Sensors configuration/Sensors"""""
In this menu window you choose in the yellow
window cutout a sensor (or a signal
conditioning instrument) which should be
overwritten by the adjustments of another
sensor.
Choose in the field " Selection of backups" the
serial number of the sensor of which you
want to transfer the adjustments. With
"
Restore to" you transfer these sensor
adjustments to the sensor you have chosen
in the yellow window cutout.
Set-up - Adjustment with the PC on VEGAMET