VEGA VEGAPULS 51V…54V - Manual (Page 90)

90 VEGAPULS 51 V … 54 V
Backup
• Click to
" Services/Backup/Signal conditioning Services/Backup/Signal conditioning Services/Backup/Signal conditioning Services/Backup/Signal conditioning Services/Backup/Signal conditioning
instruments instruments instruments instruments instruments"
In the menu window " Backup" the VEGALOG
with the serial number is displayed. You can
save the data of VEGALOG individually or in
groups with all adjustments in a directory of
your choice on the PC. You can also add
short backup notes.
In the same way you save the adjustments of
the sensors:
Saved sensor data can be later transferred
to other sensors.
E.g. if you have a system with several of the
same storage tanks and identical sensors, it
is sufficient to configure one sensor, to save
the adjustments and transfer them to the
other sensors.
Naturally it is also possible that data of a
processing system VEGALOG are
transmitted to a VEGALOG.
• Choose the menu " Services/Restore Services/Restore Services/Restore Services/Restore Services/Restore
configuration/Signal conditioning configuration/Signal conditioning configuration/Signal conditioning configuration/Signal conditioning configuration/Signal conditioning
instruments
instruments instruments instruments instruments"
In this menu window you choose in the yellow
window cutout a VEGALOG (or a sensor),
which should be overwritten with the
adjustments of another VEGALOG.
Choose in the field " Selection of backups" the
serial number of the VEGALOG, of which you
want to transfer the adjustments. With
"
Restore to" you transfer these VEGALOG-
adjustments to the VEGALOG, which you
have selected in the yellow window cutout.
Set-up - Adjustment with the PC on VEGALOG