VEGA VEGAPULS 51V…54V - Manual (Page 52)

52 VEGAPULS 51 V … 54 V
As parameter you can choose "dimensionless
(figures), volume, mass, height and distance"
and coordinate an appropriate meas. unit
(e.g. l, hl).
The sensor indication displays then the figure
in the chosen parameter and unit.
• Save the adjustments in the menu " Scaling"
with " OK OK OK OK OK".
A warning is displayed that the indication has
been formerly adjusted to %. Confirm the
adjustment, for indication in litres.
The adjustments are now transmitted to the
sensor and you are again in the menu
window "
Conditioning".
Conditioning
• Click in the menu window "Instrument data
parameter adjustment" to " Conditioning Conditioning Conditioning Conditioning Conditioning".
The menu window " Conditioning" opens.
• Click to " Scaling Scaling Scaling Scaling Scaling".
In the menu " Scaling" you enter the actual
0 % and 100 %-values of the parameter and
their unit. Hence you inform the sensor, e.g.
that at 0 % filling there are 45,5 litres and at
100 % filling 1200 litres in the vessel.
The sensor indication then displays with empty
vessel 45,5 litres (0 %) and at full vessel
1200 litres (100 %).
Set-up - Adjustment with the PC on VEGAMET