5 integration time – VEGA VEGAMET 514 User Manual
Page 23
Advertising
VEGAMET 514
23
Settings in the "reduced menu"
6.5 Integration time
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1
Ad-
just-
ment
Signal
condi-
tioning
Scal-
ing
Integr
ation
time s
0
Meas.
value
indication
If the integration time is set to 0 s (factory
setting), each quick change of the product
surface (e.g. waves) will be immediately
detected and interpreted as level change. All
output values of VEGAMET will react
immediately to the wave movements. To
avoid this, the integration time can be
increased (max.
600 s are possible with VEGAMET). The
higher the time adjustment, the slower the
measurement reacts.
Advertising