VEGA VEGAMET 514 User Manual
Page 55
Advertising
VEGAMET 514
55
Error code
Meaning
Diagnostics
E061
Span of the voltage output values too small. The values for the voltage output
are too close togehter or are identical. Please check the adjustment of the
voltage output.
E063
Incorrect sensor characteristics values. Please check the sensor
characteristics values
E102
A reset of the configuration was carried out on this VEGAMET via the key-
board.
E110
Switching hysteresis to small. The switching points are too close together or
are identical.
E111
Relay switching points reversed. The relay switching points are reversed with
respect to the selected relay mode.
Advertising