VEGA VEGAMET 514 - Manual (Page 36)

36 VEGAMET 514
Settings in the "extended menu"
Relay outputs
A hold function or a function for reset of alarm
functions can be allocated to each operating
relay. In this case, the menu item "Input unde-
fined" appears. There "Input 4" (correction
input) can be assigned to the relay. For a
description of the relay functions, see the
drawing.
Hold function
d
t
b z
High
Low
Key
d
t
b z
High
Low
Key
The relay modes "Hold function" and "Reset of
alarm functions" are configured as described
above and are each activated by an external
signal (correction signal input).
Parameter
Reset of alarm functions
Parameter
Relay output
Relay output