VEGA VEGAPULS 81 User Manual
Page 56
56
VEGAPULS 64 and 81
After entering the identification the program
gets in contact with the connected sensor and
signal conditioning instrument.
Set-up: Adjustment with PC
Under the menu “
User access“ the user name
and the password can be deleted and replace
by your own.
Create new measurement loop
• Choose first the menu “
New“.
• Choose distance measurement or level
measurement and the measuring principle
(Pulse-Radar).
You now start to create a new measurement
loop.
• Click the button “
Continue“.
The following picture is used for further specifi-
cation of the sensor/input. Input of information
in this picture is only necessary for pressure
transmitters.
In the following set-up example, a signal con-
ditioning instrument VEGAMET 515 V with two
sensors (VEGASON 83 FV and VEGAPULS
64 FV) are connected to a measurement loop.
Set-up steps with the PC
The set-up of a radar sensor with the PC re-
quires first of all the creation of a measurement
loop and then the configuration of the sensor.