VEGA VEGAPULS 81 - Manual (Page 66)

66 VEGAPULS 64 and 81
Set-up: Store and copy adjustment data
Data base check
When you get in contact with your measure-
ment loops via the adjustment software VVO,
the adjustment program checks whether the
adjustments in the signal conditioning instru-
ment or the sensor correspond with the adjust-
ments of the adjustment software.
If e.g. after the set-up of a measurement loop
with the adjustment software (via PC) on the
signal conditioning instrument VEGAMET, an
adjustment had been modified, the following
information is displayed when connecting the
PC again with the measurement loop.
If you want to add notes to the backup files
with saved signal conditioning instruments or
want to delete them, choose “ Choice
VEGAMET“. You come to the appropriate
window “ Edit backup“, where you can add
notes or delete backup files like for the sensor
data.
- With “ Load data from VEGAMET“ you take
over the complete adjustment of the meas-
urement loop into the PC and the adjustment
software.
- With “ Transfer data to VEGAMET“ you
overwrite the adjustments of the measure-
ment loop in the VEGAMET with the adjust-
ments in the adjustment software VVO.