VEGA VEGAPULS 81 User Manual
Page 81
VEGAPULS 64 and 81
81
Set-up: Menu survey of the signal conditioning instrument
Additional functions
Reset VEGAMET (E)
–– Reset Configuration
–– to Default
With Reset to Default the whole configuration
–– Reset OK?
and parameter adjustment (probably all TAGs)
–– Reset now! OK?
are reset to factory setting.
However the basic configuration remains,
e.g. level measurement pressurized.
–– to linked application
The single measurements available at the
–– delete all TAGs?
moment will be deleted and a pre-configuration
–– etc.
to linked application is generated instead.
–– to single measurement
–– Delete TAG1?
A linked application available at the moment
–– etc.
will be deleted and a pre-configuration to single.
–– Delete TAG2?
measurements will be generated instead.
–– etc.
–– Reset sensor values
–– Reset input 1
The sensor data of the sensor connected to
–– Reset OK?
input 1 will be deleted
–– Reset now! OK?
–– Reset input 2
as above, however input 2
–– Delete all sensor values
as above, however input 1 and 2
–– Reset linearization curves
–– Reset Lin. curve 1
With this reset the index markers of
–– Reset OK?
linearization curve 1 will be deleted
–– Reset now! OK?
–– Reset Lin. curve 2
as above, however linearization curve 2
–– Reset Lin. curve 3
as above, however linearization curve 3
–– Reset all curves
as above, however all linearization curves