GE Industrial Solutions TLE Series 225-500 User Manual - Manual (Page 29)

Critical Power
Modifications reserved Page 29/90
GE_UPS_USM_TLE_SUL_M22_M50_1US_V010.docx User Manual TLE Series 225 - 500 UL S1
LOAD SCREEN
Voltage L1 / L2 / L3
Output voltage PHASE/NEUTRAL for
each phase.
Current L1 / L2 / L3
The output current as RMS values for
each phase.
Percent load L1 / L2 / L3
The output Load as percentage for each
phase.
Active power Load active power (kW) for each phase.
Apparent power Load apparent power (kVA) for each phase.
Power factor Load power factor: + inductive load / - capacitive load
Status Source of the power supplied to the Load.
Inverter operating time Total operating time for the Inverter (in hours).
Apparent power Total apparent Load power (kVA).
UPS operation time Total operating time for the UPS (in hours).
Active Power Total effective Load power (kW).
eBoost operation time Total operating time for the UPS in eBoost™ Operation Mode (in hours).
This counter is displayed only when eBoost™ Operation Mode is available
(option).
Overload counter Total number of detected output overloads.
IEMi operation time Total operating time for the UPS in IEMi Operation Mode (in hours).
This counter is displayed only when IEMi Operation Mode is available (option).
BOOSTER SCREEN
Battery voltage
The battery voltage.
Battery current
The battery current (negative values
correspond to the discharge of the
battery).
Voltage DC-link 1
DC-link 1 voltage.
Voltage DC-link 2
DC-link 2 voltage.
Status Booster status (Off / Booster / Charger).
Temperature Temperature of the 4 th leg’s bridge.
Temperature 1 Booster temperature.