GE Industrial Solutions TLE Series 225-500 User Manual - Manual (Page 41)

Critical Power
Modifications reserved Page 41/90
GE_UPS_USM_TLE_SUL_M22_M50_1US_V010.docx User Manual TLE Series 225 - 500 UL S1
PRINTER SCREEN
The UPS is capable of communicating to
a serial printer, to printout disparate
information.
Please be sure to have a serial printer
with a serial RS232 interface.
This is the only printer-interface
supported by the UPS.
Baudrate
This parameter controls the baud rate
used for data transmission.
Parity This parameter controls the parity used for data transmission.
odd / even / None can be selected.
In case “None” has been set, automatically the parameter “Data bits = 8” is used,
independently of the value of “Data Bits” set.
Data bits This parameter controls the length of the data word on the serial line during data
transmission.
Stop bit Parameter non programmable.
Handshake This parameter is used to determine the communication protocol used when
printing.
Valid values are “XON” standing for the XON/XOFF protocol or “None” standing for
any protocol.
PRINTER
COMMANDS By using the keys MEASURES / ALARMS / PARAMETERS / ALL it is possible to print
selected data
NOTE !
Please configure your printer with the following parameters :
2400/None/8/2/None (2400 bauds/sec, no parity, 8 bits, no Handshake).
DISPLAY SCREEN
Date
You can adjust the date of the real time
clock existing in the UPS by the means
of this parameter (“dd-day, mm-month,
yyyy-year”).
The value you enter is thoroughly
checked to be a correct date in the
format “MM.DD.YYYY”.
Time
You can adjust the time of the real time
clock existing in the UPS by means of
this parameter.
The value you enter is thoroughly
checked to be a correct time in the
format “HH.MM.SS”.
The time is specified in AM/PM format.
Language This parameter allows the choice of language used to display the information.
Valid choices are: English, German, Italian, Spanish, French, Finnish, Polish,
Portuguese, Czech, Slovenian, Chinese, Swedish, Russian and Dutch.
UPS name The user can choose the name of the UPS model shown on the main screen (max.
20 characters).