GE Industrial Solutions AF-60 LP Micro Drive Operating Instructions - Manual (Page 16)

For EMC correct installation, use optional de-coupling plate, see chapter Op-
tions for frequency converter.
Illustration 3.5: Frequency converter with de-coupling plate
3.4 Control Terminals
3.4.1 Access to Control Terminals
All control cable terminals are located underneath the terminal cover in front
of the frequency converter. Remove the terminal cover using a screwdriver.
Illustration 3.6: Removing terminal cover.
NB!
See back of terminal cover for outlines of control terminals and switches.
AF-60 LP™ Micro Drive Operating Instructions
DET-579A
15
3