GE Industrial Solutions AF-60 LP Micro Drive Operating Instructions - Manual (Page 26)

7-33 Process PI Proportional Gain
Range: Function:
[0.00 - 10.00] Enter the P-factor.
7-34 Process PI Integral Time
Range: Function:
[0.10 - 9999.00 s] Enter the I-factor.
7-38 Process Feed Forward Factor
Range: Function:
[0 - 400%] Only applicable with changing set-points.
4.5 Main Menu
The Main Menu gives access to all parameters.
1. To enter the Main Menu, press [MENU] key until indicator in display
is placed above Main Menu.
2.
Use [
▲
] [
▼
] to browse through the parameter groups.
3. Press [OK] to select a parameter group.
4. Use [
▲
] [
▼
] to browse through the parameters in the specific group.
5. Press [OK] to select the parameter.
6.
Use [
▲
] [
▼
] to set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice to enter Quick Menu, or press
[Menu] once to enter Status.
Illustration 4.9: Indicating Main Menu mode
AF-60 LP™ Micro Drive Operating Instructions
DET-579A
25
4