Xylem Magflux Electromagnetic Flow Meter - Manual (Page 41)

41
Electromagnetic Flow Meter
FW: 842018/842009
Display Read-out, several connected units
When several MJK units are interconnected, for example an Oxix ® dis-
solved oxygen transmitter and MagFlux ® flow meter with different names
and Modbus ID numbers, a "Display Overview Menu" is available at top
level (press "Back" repeatedly):
MagFlux
Back Select Setup
MagFlux
Flow
4.1
m 3 /h
FTot 18.77 m 3
Select Setup
4.1 m 3 /h
Oxix1 91.9 %
All connected units are displayed and sorted by their ID numbers, and
consequently each unit can be selected and set up as required:
MagFlux
Flow
4.1
m 3 /h
FTot 18.77 m 3
Select Setup
Oxix1
Oxygen sat.
91.9
%
Select Setup
or
MagFlux
Flow
4.1
m 3 /h
FTot 18.77 m 3
Select Setup
Oxix1
Oxygen sat.
91.9
%
Select Setup
Important:
More connected units can only by managed as described above, if
each unit have been assigned a unique name and Modbus ID num-
ber. See page
98 for details.
Display Keys
The keys and the soft keys (variable key functions determined by the
display firmware) are used for initial programming and normal operation of
the flow meter.
The function(s) of the four available keys is displayed at the bottom of the
display. The symbols and actual functions are described in detail in the
sections that describe the individual menus.