Extron Electronics MGP Pro Series User Guide - Manual (Page 122)

MGP Pro Series • Reference Information 116
Uploading the firmware using the MGP Series Control Program
To update the firmware on the MGP Pro using the control software:
1. Open the control program, using an IP connection (see Windows-based Control
Software on page 81 for information on accessing this program).
2. From the Tools menu, select Upload Firmware... . An Open window appears.
3. Browse to locate the firmware file that you saved to your computer. The file extension
must be
.S19.
ATTENTION: Valid firmware files must have the file extension .S19. A file with any
other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
Figure 56. Open Window with Firmware File Selected
4. Double-click on the firmware file icon. The firmware uploading process begins. While
the firmware is loading, a progress bar is displayed and the MGP Pro front panel LCD
screen displays
Firmware Upload Please Wait .
Figure 57. Firmware Update Progress Bar
5. When the firmware update is complete, the progress bar closes.