Extron Electronics MGP Pro Series User Guide User Manual
Page 23
MGP Pro Series • Operation
17
3.
Submenu options — When the Main menu item that you want to configure is
displayed on the LCD screen, press the Next button (at the right of the Menu button) to
cycle through the submenu options of the displayed menu.
4.
Adjustments — With a desired submenu option displayed, rotate the horizontal ([)
and vertical ({) Adjust knobs clockwise or counterclockwise to display and select the
parameters available for the option.
5.
Implementation — To save and implement the adjustments you have selected, do one
of the following:
•
Press Next to display another submenu option to adjust.
•
Press Menu repeatedly until the Exit menu screen appears, then press Next.
•
Do nothing more, and wait until the LCD screen returns to the default cycle.
Your adjustments remain in effect until you change them or reset the unit to factory defaults
(see
NOTE: The menus time out and the default cycle displays after 20 seconds of inactivity.
However, any selections you made with the Adjust knobs are saved and remain in
effect.