Extron Electronics MGP Pro Series User Guide - Manual (Page 30)

MGP Pro Series • Operation 24
Analog Format submenu
Rotate either the horizontal Adjust ([) or the vertical Adjust ({) knob to select the analog
output signal type required by the display device. Available signal types are RGBHV, RGsB,
RGBS, YUV bi-level and YUV tri-level. The default is RGBHV.
Sync Polarity submenu
The display device may require a particular combination of horizontal (H) and vertical (V)
sync signal polarities. Rotate either the horizontal Adjust ([) or the vertical Adjust ({) knob
to select the sync polarity. The options are H-V- , H+V- , H-V+ , H+V+ , or na (appears when
YUV Bi-lvl or YUV TriLvl is selected). The default is H-V- .
HDMI Format submenu
Rotate either Adjust knob to select the digital format of the HDMI output. If you select AUTO ,
the MGP Pro detects the EDID from the connected display and determines if it supports the
transmission of the ancillary data containing the information frame.
To manually specify whether the data is transmitted, select the
DVI RGB 444 or
HDMI RGB 444 option (RGB 444 is the DVI or HDMI colorspace).
Window Configuration Menu
The Window Configuration menu allows you to set window front/back priority, add colored
borders to the windows, select which window transition effect to use when muting (closing)
and unmuting (displaying) a window, and specify the duration of the selected effect.
Figure 18. Window Configuration Menu Flow