Extron Electronics MGP Pro Series User Guide - Manual (Page 40)

MGP Pro Series • Operation 34
Factory Default submenu
This submenu lets you reset the MGP Pro to the default settings with which it was delivered
from the factory. Press the Detail button to initiate the reset.
Adding and Configuring Window Text
You can add a text box or label containing up to 16 characters to each window. You
can also specify several parameters for the text label, including text size and color, label
background color, label border color, and the position of the text box on the screen.
These window text specifications cannot be made from the front panel. You can create and
configure the label using the Windows-based control software (see the software help file) or
SIS commands via the serial or LAN ports (see the
Remote Configuration and Control
section beginning on page 42).
Picture Controls
The MGP Pro has six picture control buttons located on the front panel to the left of the
Menu button. You can use these buttons to adjust size, position, brightness and contrast,
color and tint, detail, and magnification (zoom).
NOTES:
• Picture controls are window-dependent. You set the values separately for each
window.
• For Window/Image Size, Window/Image Position, and Window/Image Zoom, press
the button repeatedly to switch between window settings and image settings.
Adjusting the Picture Controls
Make image adjustments to an input by using the picture control buttons on the front panel.
When you select one of these buttons, the button for the most recently selected window
lights, indicating that the window is being adjusted.
To adjust the picture controls:
1. Press the Window Select button to select the window you want to adjust.
2. Press the Input button for the input that you want to adjust, if it is not currently selected.
3. Press the button for the desired picture control: Window/Image Size (sizing), Bright/Cont
(brightness and contrast), Detail (sharpness), Window/Image Position (moving and
centering), Color/Tint (color quality), or Window/Image Zoom (magnification).
4. Rotate the horizontal Adjust ([) or vertical Adjust ({) knob to select a level from the
available range.
5. Repeat steps 1 through 4 for each image adjustment to be made for the selected input/
window.
NOTE: The LCD screen may display NA in place of a number if that adjustment does
not apply to the input video format.