Extron Electronics MGP Pro Series User Guide - Manual (Page 9)

MGP Pro Series • Introduction 3
• Auto Image — Auto Image automatically sizes, centers, and optimizes the image to
the scaled output rate, filling the window.
• EDID emulation — The MGP provides selectable resolutions and refresh
rates, enabling you to specify the rate of the incoming signal and ensure proper
communication with the video source.
• Remote operation — The MGP Pro can be operated remotely via the serial interfaces
using the Windows-based control software or SIS commands, or via the Ethernet
interface using the embedded web pages, SIS commands, or the Windows-based
control software.
• Rack mounting — The 2U high and full rack wide metal enclosure can be rack
mounted using the included rack and through-desk mounting brackets.
• Front panel security lockout (executive mode) — Locks the front panel controls to
prevent unauthorized use in non-secure environments or accidental changes to the unit
settings.
• RGB and video scaling — All sources are scaled to a single output rate.
• Window captioning — Each picture-in-picture window can be labeled with a text
label of up to 16 characters. The label can be positioned and sized as desired, and
background, text, and border colors can be selected.
• LockIt HDMI cable lacing brackets — One bracket is provided for each HDMI input
and output connector to secure the cables to the rear panel and prevent signal loss due
to loose connections.
• Test patterns — A variety of internal test patterns, including crop pattern, crosshatch,
colorbars, and three aspect ratio patterns, enable proper system setup.
• Quad standard video decoding — A digital four-line adaptive comb filter decodes
NTSC 3.58, NTSC 4.43, PAL, and SECAM for integration into systems worldwide.