Extron Electronics MGP Pro Series User Guide User Manual
Page 68
MGP Pro Series • Remote Configuration and Control
62
Command
ASCII (Telnet)
(Host to Processor)
Response
(Processor to Host)
Additional Description
Special Functions (continued)
Set output sync format
2 *
X3&
#
Syn
X3&
]
Set the output sync format.
For
X3&
:
1 = RGBHV
2 = RGBS
3 = RGsB
4 = YUV bi-level
5 = YUV tri-level.
View output sync format
2 #
X3&
]
View current output sync format
setting
X3&
.
Set blue mode to On or Off
3 *
X$
#
Blu
X$
]
Turn blue mode on and off.
Blue mode is useful when you
are configuring display color
settings.
For
X$
:
0 = blue mode off.
1 = blue mode on.
View blue mode status
3 #
X$
]
View the current blue mode
status.
Set text position
6 *
X@
*
X^
#
X@
Tlc
X^
]
Change the location of the text
label to
X^
in window
X@
.
X@
= 0-4. 0 = all windows.
For
X^
:
0 = None
1 = Bottom left
2 = Bottom center
3 = Bottom right
4 = Top left
5 = Top center
6 = Top right.
View text position
6 *
X@
#
X^
]
View the text label position (
X^
)
in window
X@
.
Set text size
10 *
X3*
#
Tsz
X3*
]
Set the size of the label text.
For
X3*
:
1 = Small
2 = Medium
3 = Large.
View text size
10 #
X3*
]
View the current size (
X3*
) of
the label text.
Set text border color
14 *
X@
*
X3(
#
X@
Txb
X3(
]
Change the color of the text
label border in window
X@
.
X@
= 0-4. 0 = all windows.
For
X3(
:
0 = Off (no border)
1 = Red
2 = Green
3 = Blue
4 = White
5 = Magenta
6 = Cyan
7 = Yellow
8 = Black
9 = Translucent.
View text border color
14 *
X@
#
X3(
]
View the border color (
X3(
) of
the text label in window
X@
.