Extron Electronics MGP Pro Series User Guide - Manual (Page 41)

MGP Pro Series • Operation 35
Picture Controls Summary
The following table explains the functions of the Picture Control buttons and how to make
adjustments.
In this table, image number nn is the input number.
Button Display Function Range Adjust Knob
Window/
Image
Size WINDOW_n SIZE:
H=nnnn V=nnnn
Enlarge or shrink window n. Min: 1/16 of the
output rate
Max: Output rate For H (width):
Horizontal [ Adjust
knob
For V (height):
Vertical { Adjust knob
(Press button twice.)
IMAGE # nn SIZE:
H=nnnn V=nnnn
Enlarge or shrink the image
of input nn within the
window. Min: 1/16 of the
output rate
Max: 2 times the
output rate
Bright/
Cont BRIT CONT
nnnn nnnn
Brightness: Increase or
decrease intensity of video
light on screen.
Contrast: Increase or
decrease range of image
light and dark values. Brightness: 0000-0127
Default: 0064
Contrast: 0000-0127
Default: 0064
Bright:
Horizontal [ Adjust
knob
Contrast:
Vertical { Adjust knob
Detail DETAIL
nnnn
Adjust image sharpness.
0000-0127
Default: 0064
Either Adjust knob
Window/
Image
Position WINDOW_n CNTR:
H=±nnnn V=±nnnn
Position the upper-left
corner of window n on the
display in relation to the
display center. Default: 0000 ± the
output rate
For H: Horizontal [
Adjust knob
For V:
Vertical { Adjust knob
(Press button twice.)
IMAGE #nn START:
H=±nnnn V=±nnnn
Position the upper-left
corner of the image of
input nn within the window
in relation to the window
center. Default: 0000 ± the
output rate
Color/
Tint COLOR TINT
nnnn nnnn
Color: Adjust color intensity.
(At the lowest adjustment,
all colors are shades of
gray.)
Tint: Change the
appearance of colors. Color: 0000-0127
Default: 0064
Tint: 0000-0127
Default: 0064
Color: Horizontal [
Adjust knob
Tint:
Vertical { Adjust knob
Window/
Image
Zoom WINDOW_n ZOOM:
H= nnnn V= nnnn
Increase or decrease the
size of the selected window
while keeping the aspect
ratio constant. Min: 1/16 of the
output rate
Max: Output rate For H:
Horizontal [ Adjust
knob
For V:
Vertical { Adjust knob
(Press button twice.)
IMAGE # nn ZOOM:
H= nnnn V= nnnn
Increase or decrease the
size of the image of input
nn in the selected window
while keeping the aspect
ratio constant. Min: 1/16 of the
output rate
Max: 2 times the
output rate