Extron Electronics MGP Pro Series User Guide User Manual
Page 76
MGP Pro Series • Remote Configuration and Control
70
Command
ASCII (Telnet)
(Host to Processor)
URL Encoded (Web)
(Host to Processor)
Response
(Processor to Host)
Additional Description
Firmware Version Requests (continued)
Query factory
firmware version
3Q
3Q
X10$
(plus web ver.-desc-UL date/time)
]
With tagged response – verbose modes 2 and 3:
Ver03 *
X10$
(plus web ver.-desc-UL
date/time)
]
Factory-installed firmware is
not user-replaceable. This
firmware was installed at the
factory and is the version the
processor reverts to after a
mode 1 reset (see
on page 40).
Example:
3Q
3Q
1.00 (1.07-MGP464 PRO -Wed, 16 Jan 2013
03:28:10 GMT)
In this example, the factory
firmware version is 1.00, also
known as the kernel version
1.07, for an MGP 464 Pro,
dated 16 January, 2013.
Query updated
firmware version
4Q
4Q
X10$
(plus web ver.-desc-UL date/time)
]
With tagged response – verbose modes 2 and 3:
Ver04 *
X10$
(plus web ver.-desc-UL date/
time)
]
Use this command to find out
which version of the firmware,
if any, was uploaded into the
unit after it left the factory.
X10$
= firmware version to
two decimal places.
Example:
4Q
4Q
2.02 * (1.66– MGP464 Series –Mon, 14 Jan
2008 17:03:46 GMT
In this example, the factory
firmware version is 2.02,
also known as kernel version
1.66, for an MGP 464 Pro,
dated 14 January, 2008, at
5:03 and 46 seconds pm,
Greenwich mean time.