Burkert Type 8611 User Manual
Page 63
63
FunctionsoftheConfigurationLevel
display SETP
description
INT
Internal set-point value default.
Is entered in the operating state MANUAL in the
SET menu using the keyboard.
See chapter “11.5. SET - Set-point value default for process control”
EXT
External process set-point value default using standard signal (4 - 20 mA or 0 - 10 V).
4 mA / 20 mA
Scaling of 4 - 20 mA standard signal (for definition of decimal places see
UNIT menu).
0 V / 10 V
Scaling of 0 - 10 V standard signal (for definition of decimal places see
UNIT menu).
Table 20:
Display SETP
Setting in the menu for ratio control (
RFAC):
S_IN
AOUT
RFAC
0000
4 mA
*
)
9.999
20 mA
*
)
0000
0 V
*
)
9.999
10 V
*
)
INT
EXT
Selection of standard signal
4 – 20
0 – 10
Scaling
Selection of
set-point value default
*
)
The display depends on the selection
of the standard signal
Figure 48:
RFAC; Setting the ratio factor
display
RFAC
description
INT
Internal ratio factor default.
Is entered in the operating state MANUAL in the
RFAC menu using the keyboard.
See chapter “11.6. RFAC - Ratio factor default for ratio control”.
Value range: 0.000 to 9.999
EXT
External ratio factor default (
RFAC) using standard signal (4 - 20 mA or 0 - 10 V).
4 mA / 20 mA
Scaling of 4 - 20 mA standard signal (value range: 0.000 - 9.999).
0 V / 10 V
Scaling of 0 - 10 V standard signal (value range: 0.000 - 9.999).
Table 21:
Display RFAC
The decimal place for the ratio factor
RFAC is fixed and cannot be changed.
english
Type 8611