End position led green and yellow, Jumper function, Change assignment of the end position leds – Burkert Type 8695 User Manual
Page 35
35
Electricalinstallation24VDC
9.4.3
end position leD green and yellow
Factory setting:
color
Device status
green LED on
End position bottom
yellow LED off
End position top
Table 5:
Assignment of end position LEDs - 24 V DC
9.4.4
Jumper function
You can set the color assignment of the end positions with the jumpers. You can indicate for each color whether it
applies to the Top (end position top) or Bot (end position bottom).
9.4.5
change assignment of the end position leDs
Danger!
risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
Procedure:
noTe!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
→
Open control head: turn the transparent cap anti-clockwise.
Body casing
Connection housing
Actuator
Transparent cap
Figure 23:
Open control head
english
Type 8695