Burkert Type 8695 - Manual (Page 61)

61
Disassembly
2. Electrical connection
Danger!
risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
→
Loosen the circular plug-in connector.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the control head upwards.
Pneumatic connections
Control head
Actuator
Fastening screws (2x)
Electrical connection
circular plug-in connector
Pneumatic connection to the
actuator
Series 21xx
(Element)
Series 20xx
(Classic)
Figure 48: Disassembly the control head
english
Type 8695