Burkert Type 8750 - Manual (Page 40)

40
DeviceNet start-up
Typ 8750
BUS FAIL
Activate or deactivate approach of the safety
position
SafePos off
The actuator remains in the position which cor-
responds to the set-point value last transferred
(default setting).
SafePos on
If there is a fault in the bus communication, the
behavior of the actuator depends on the acti-
vation of the
SAFEPOS auxiliary function.
SAFEPOS activated: The actuator moves to the safety position
which is specified in the
SAFEPOS aux-
iliary function.
SAFEPOS deactivated: The actuator moves to the safety end
position which it would assume if the elec-
trical and pneumatic auxiliary energy failed.
See Chapter “15. Safety end positions”.
OK
Address 0
BAUD RATE
BUS FAIL
125 kBd
SafePos off
250 kBd
500 kBd
SafePos on
BUS.COMM
ENTER
INPUT Enter
value
EXIT
EXIT
ENTER
ENTER
+
–
Input device
address.
Adjustment range:
0 – 63
18)
Selection
of the baud
rate
Activate /
deactivate
approach
of the
safety
position
SELEC
SELEC
EXIT
Fig. 24: Operating structure BUS.COMM - DeviceNet
english