Burkert Type 8750 - Manual (Page 5)

5
Quickstart Guide
Typ 8750
1. QuicksTarT Guide
The quickstart guide describes the entire life cycle of the device. Keep
these instructions in a location which is easily accessible to every user
and make these instructions available to every new owner of the device.
important safety information.
Read Quickstart carefully and thoroughly. Study in particular the
chapters entitled Basic Safety Instructions and Authorized Use.
▶ Quickstart must be read and understood.
The Quickstart guide illustrates the installation and commissioning of
the equipment with examples.
A detailed description of the process controller can be found in the
operating instructions for Type 8693.
The operating instructions can be found on the Internet at:
www.burkert.com
1.1. definition of terms / abbreviation
In these instructions, the term “device” always refers to the flow
controller Type 8750.
FMR = Flow controller
2. symbols
The following symbols are used in these instructions.
Danger!
warns of an immediate danger.
▶ Failure to observe the warning will result in a fatal or serious injury.
Warning!
warns of a potentially dangerous situation.
▶ Failure to observe the warning may result in a serious or fatal injury.
Caution!
warns of a possible danger.
▶ Failure to observe this warning may result in a moderate or minor
injury.
note!
warns of damage to property.
Important tips and recommendations.
Refers to information in these operating instructions or in
other documentation.
▶ Indicates an instruction to prevent risks.
→
designates a procedure which you must carry out.
english