Soft-voice product features and specifications, Pc requirements, Software description – Clear-Com VOICE2 User Manual
Page 100: Codecs supported, Soft-voice product features and specifications -2, Pc requirements -2, Software description -2, Codecs supported -2
Advertising
Vitec Group Communications
VoICE IP Interface User Manual
6 - 2
• Port Status LEDs 1-4
These 4 LEDs each indicate the status of the related port. The
table of the LED behavior and the related status is given below:
SOFT-VOICE PRODUCT FEATURES AND
SPECIFICATIONS
PC REQUIREMENTS
• Pentium IV 2.4GHz or Athlon 2400+
• 256 Mb RAM
• 25Mb hard disk space
• Windows 2000 or Windows XP
• 1 Sound card
• Headset connector
• CD-ROM drive
• Ethernet Port
• Colour monitor
SOFTWARE DESCRIPTION
CODECs supported
• G.711
• G.722
• Speex 16k
• Speex 32K
• Linear PCM
• Sample Rates supported
• 8, 16 and 32KHz.
Port LED Behavior
LED Behavior
Status
OFF
The port is not enabled
Flashing GREEN
The port is enabled but not connected
Steady GREEN
The port is connected
Advertising