Operation, Getting started, What you should have received – Clear-Com VOICE2 User Manual
Page 21: What you need to get, Operation -1, Getting started -1, What you should have received -1, What you need to get -1, Unit -1
Vitec Group Communications
VoICE IP Interface User Manual
2 - 1
OPERATION
GETTING STARTED
This chapter covers getting started with the VoICE 2.0 IP-Interface
product for the very first time. More detailed information on the
installtion and configuration of VoICE 2.0 IP Interface is given in the
chapter on installation.
Readers should have basic PC knowledge and some knowledge of the
application in which they wish to use the unit.
This section describes:
i. Configuring the PC’s web browser
ii. First time configuration of the units
iii. Setting characteristics
iv. Connecting to the LAN and Matrix or Panel
What you should have received
1. A CD (part no. 750028Z) containing this manual and system
software.
2. A pair of VoICE 2.0 units each comprising:
• A 1U 19” rack mount unit
Figure 2-1: Unit
• Power cord
Note that you may only have one unit if you are connecting to an
existing unit or virtual PC intercom panels, SOFT-VoICE.
This section describes the installation and setup of the IP Interface
product, including cable connections and configuration. The following
subjects are covered in this section:
• Description
• Installation in a rack
• Wiring
• Setup
What you need to get
1. A PC with a web browser (e.g. Internet Explorer or Mozilla Firefox)
2