Clear-Com VOICE2 - Manual (Page 19)

Vitec Group Communications
VoICE IP Interface User Manual 1 - 1
INTRODUCTION
VOICE 2.0 INTERFACE FOR ECLIPSE AND
OTHER MATRIX SYSTEMS
The 1RU 4 way interface provides users with a simple and low cost
solution to extending intelligent intercom facilities to remote sites over
IP infrastructure.
Each VoICE 2.0 interface operates back to back with others, in a
Server and Client configuration to provides these connectivity
opportunities:
• Up to four remote user panels intelligently linked backed to the matrix
with all the functionality of a locally connected panel.
• Up to four intelligent trunk lines between remote matrix systems
which provides efficient and automatically managed routing
between remote systems.
• Up to four 4-wire Audio pairs and four Asynchronous RS-422 data
links between remote sites.
• Up to four Remote PC based SOFT-VoICE Virtual Intercom panels to
matrix ports.
The interface uses state of the art audio CODECs to provide low
latency audio digitisation in a user selectable compression format from
linear to 15KHz (-3dB) bandwidth.
Latest Echo Cancelling technology enables the use of a gooseneck
mic and loudspeaker operation as well as headset by digitally reducing
acoustic echoes.
The IP processing engine uses the very latest in AES 128 bit
compression technology to provide high priority tunnelling without
compromising network security.
Each frame comes with web client application that provides for both IP
line and CODEC setup and diagnostics that can be monitored from a
centralised remote maintenance position.
SOFT-VOICE FOR PC
SOFT-VoICE is a software package that can be installed on a suitable
PC to allow it to be connected to an audio communications system
over an ethernet connection.
The SOFT-VoICE package is also described in this manual.
A system consists of at least
two VoICE units which
operate as a pair. One must
be designated as Client and
the second as a Server.
1