Clear-Com VOICE2 - Manual (Page 70)

Vitec Group Communications
VoICE IP Interface User Manual
3 - 3 0
RECOVERY CD
The CD supplied also contains an image for a recovery CD. This CD
will allow systems that have become unusable, for example because
the IP address is unknown, to be completely reset.
To use the recovery CD carry out the following steps:
1. First burn the recovery disk ISO image onto a CD.
2. Attach an external USB CDROM drive to the VoICE unit’s USB port.
3. Restart the VoICE unit so it boots from the CDROM instead of the
internal system.
4. The CDROM system with return the unit to its factory shipment
condition. During this phase the LEDs on the front will flash
sequentially to indicate that the recovery is in progress. When
recovery is complete all the front LEDs will flash together.
5. When the VoICE unit restore is complete remove the external
CDROM drive from the VoICE unit.
6. Restart the VoICE unit.
7. Configure the VoICE unit as described in this manual.