Advanced tab, Advanced tab -16, Data items -16 – Clear-Com VOICE2 User Manual
Page 56
Vitec Group Communications
VoICE IP Interface User Manual
3 - 1 6
ADVANCED TAB
The Advanced tab allows the configuration of certain IP functions that
may be required to optimize the function of the unit on some networks.
DATA ITEMS
Item
Description
Framing
The VoICE is design to pass any RS422 serial data in
parallel with the audio. Three types of framing meth-
ods are available:
1.None: no deframing
2.Eclipse/4000: specific for Clear-Com panels on
Eclipse or 4000 Series II
3.Matrix Plus: specific for Clear-Com Matrix+
Baudrate
This is the baudrate that will be used on the specified
serial connections on the To Matrix or the To Panel
ports. This should match the device configuration.
Default is 19200.
Data Bits
Number of Data bits settings on the serial protocol for
the specified port. This need to match with the device
to which it is connected to. Default is 8.
Parity
Serial protocol parity setting for the specified port.
This need to match with the device to which it is con-
nected to. Default is None.
Stop Bits
Serial protocol stop bit setting for the specified port.
This need to match with the device to which it is con-
nected to. Default is 1.
Flow Con-
trol
Serial protocol flow control setting for the specified
port. This need to match with the device to which it is
connected to. Default is none.