Clear-Com VOICE2 - Manual (Page 60)

Vitec Group Communications
VoICE IP Interface User Manual
3 - 2 0
UPGRADE TAB
Selecting this tab allows the system firmware to be upgraded to a
newer release that may be supplied. It also allows a previous version
of the firmware to be reinstalled if required.
If a previous version of the system firmware is being installed and is
reverting to a previous major release it is recommended that the
system recovery CD is used (See “Recovery CD” on page 30.)
Figure 3-11: Upgrade Tab Screen
The firmware for the release covered by this manual (2.0) is supplied
on the CD that contains this manual.
To install the firmware click on the ‘Browse’ button to browse the CD
and select the firmware file.
After selecting the file so that the name appears on the ‘New Filename’
line click on the ‘Upgrade’ button to upgrade the firmware. The
UPGRADE TAB ITEMS
Item Description
New Filename This text box is used to specify the IMG file to
upgrade the Eclipse .
Browse… This button is used to browse your local drives to
find the proper IMG file for upgrade.
Upgrade This button is used to start the upgrade procedure.