Clear-Com VOICE2 - Manual (Page 31)

Vitec Group Communications
VoICE IP Interface User Manual 2 - 1 1
Figure 2-16: Internet Protocol Properties
11. At this point it would be prudent to record any of the settings that
you currently have in the Internet Protocol TCP/IP Settings
including anything that is in the advanced configuration.
12. Make sure that Use the following IP address is selected (not
Obtain an IP address automatically).
13. Change the IP Address to 10.0.0.2 and the subnet mask to
255.0.0.0 (leave Default gateway blank):
Figure 2-17: IP Address Setup
14. Make sure that all of the DNS entries are blank:
Figure 2-18: DNS Settings