CONTREX ML-Drive - Manual (Page 76)

3 - 42
Output Monitoring
These MPs monitor the ML-Drive's outputs.
MP-47 DRIVE OUTPUT
The Drive Output (MP-47) displays the drive output to the motor (J2 pin 1, 2). Drive
Output is displayed as a percentage; 100 represents 100% of the drive output.
MP-56 LOGIC OUTPUTS
The Logic Outputs (MP-56) displays the status of the Drive Enable and the Alarm digital
outputs. The number “1” indicates an inactive or de-energized (logic high) level. The
number “0” indicates an active or energized (logic low) level. In the example below,
“Alarm” is the inactive or de-energized (logic high) level.
Drive Enable (J4 Pin 16)
Alarm (J4 Pin 17)
Not Used
Not Used
Code