Luminex xPONENT for MAGPIX - Manual (Page 24)

LIS Settings
You must have the LIS version of the software to perform this task.
To connect to the LIS, check Connect to LIS. In the Watch folder for incoming orders box,
browse to the location where xPONENT should watch for incoming orders.
Select the options you want to enable in the software and click Save.
External Analysis Program Settings
Use this option if you are using a program other than xPONENT to analyze collected data.
This tab contains the following fields:
Installed Analysis Programs - Lists the analysis programs currently installed.
Browse - Opens another dialog box to select the file location for the third-party analysis
program. The selected location appears in the Path box, and the name displays in the Name
box.
Command Line Parameters - Type the command line parameters for the parameters you
want xPONENT to use with the external analysis program. If the information is supplied with
the external analysis program documentation, use that information. Otherwise, you can type
the following default parameters, built into xPONENT, in any order:
• #c - Output.csv, full file path
• #p - Protocol name
• #b - Batch name
• #u - Logged in user name
To keep the default command line settings, leave Command Line Parameters blank.
Set Default - Sets the chosen analysis program as the default analysis program for
xPONENT.
OK - Saves the chosen settings and exits the dialog box.
Cancel - Cancels changes and exits the dialog box.
Remove - Removes the selected program from the Installed Analysis Programs list.
Edit - Opens the New External Analysis Program dialog box where you can edit the
settings for the selected program.
Disable Automatic launching of External Third Party Analysis when batches complete
for all protocols - Disables the automatic launch of the third-party analysis program
automatically after batch acquisition.
Application Administrator Tasks
11