Luminex xPONENT for MAGPIX - Manual (Page 49)

FIGURE 16. Home Page
Daily Activities
System Initialization - Perform a system initialization routine.
Shutdown - Perform a shutdown routine.
Probe and Heater - Adjust the probe height or plate heater.
Drive Fluid Lot - Enter the Drive Fluid lot number, which is printed on the box in which the
fluid container was shipped. This information is optional.
Create a New Batch from the highlighted Protocol below - Creates a new batch using a
selected protocol from the Installed Protocols list. This button displays the same fields as
the Create a new batch from existing Protocol button on the Batches page.
Scroll - Use the up and down arrows to scroll through the list of installed protocols.
Sys Info - Opens the System Info tab of the Maintenance page. The System Information
page displays licensing information, the instrument serial number, the date of the last CAL
Calibration, VER Verification, Fluidics tests, and other important information.
Reports - Opens the Reports tab of the Results page.
Return to the Home page at any time by clicking Home at the top of the screen.
xPONENT for MAGPIX
36