PSA PIN388D/PIN388L Installer Manual - Manual (Page 20)

PINKERTON Installer Manual 19
TABLE SECTION 1 SECTION 2
Zone One 070 224
Zone Two 072 226
Zone Three 074 228
Zone Four 076 230
Zone Five 078 232
Zone Six 080 234
Zone Seven 082 236
Zone Eight 084 238
C HANGING Z ONE C ONFIGURATIONS
The default settings for your PINKERTON system are:
Zone 1 Entry Delay Zone 5 Instant
Zone 2 Handover Zone 6 Instant
Zone 3 Handover Zone 7 24 Hour
Zone 4 Instant Zone 8 24 Hour
Should you wish to change these settings follow the instructions below. Generally there are four types of zone settings.
Each Zone has 2 sections to program, Section 1 and Section 2.
• These are indicated using the keypad lights.
• Refer to Address Descriptions on page 21 and 22 for keypad light indication.
Section 1.
Entry Delay Handover Instant 24 Hour
Section 2.
Entry Delay Handover