PSA PIN388D/PIN388L Installer Manual - Manual (Page 3)

2 PINKERTON Installer Manual
S
YSTEM
S
PECIFICATIONS
Panel Depth 78mm Code Lockout time 60 sec
Panel Width 255mm Non-volatile memory for options Yes
Panel Height 305mm Number of logical inputs to dialler 16
Panel weight (without battery) 2.2Kg Restore reporting Yes
Maximum operating ambient temperature 50°C Ademco Fast format (with checksum) Yes
AC supply voltage (via plug pack) 15V rms Report types sent Open/Close, System, Duress
DC supply voltage 11 - 14V Test report, Input alarm report
Nominal battery charge voltage 13.75V Maximum dialling attempts 00 to 09
Maximum continuous D+ current 500mA Fail to communicate triggers sirens option Yes
Reverse battery protection Yes Ring detection Yes
Charger fuse 1 Amp No of rings to answer telephone 00 to 16
Power fuse 2 Amp Automatic dialtone detection Yes
Low battery detection voltage 11.45V Decadic / Tone dial selection Yes
Typical battery capacity 6.5 A/hr Anti-jam logic Yes
Supply current (idle) 50mA Max. on-line time to monitoring station 4.25 min
Supply current (on-line) 160mA Telephone connection mode Mode 5
Additional current per DC driver on 20mA Digital decoding / generation Yes
Backup time (idle) external load 0mA 175hrs Line isolation voltage >1.5KV
Backup time (idle) external load 100mA 40hrs EMI standard AS3548 Class B
Backup time (idle) external load 200mA 20hrs DTMF output level (typical) -5 dBm
Maximum DC output current (intermittent) 2 Amp Handshake receive sensitivity (typical) -43dBm
Peak DC current output 5 Amp Call progress tone sensitivity (typical) -43dBm
End of line monitored inputs Yes DTMF decode sensitivity (typical) -35dBm
End of line resistor value 4K7 DTMF decode minimum digit duration 45mSec
User code length 4 digits Return loss (typical @ 1khz, 50mA) 20dB
Code attempts before code lockout 4 Maximum continuous line current 120mA