Teledyne 3010TB - Split architecture trace oxygen analyzer - Manual (Page 15)

Part I: 2-3
Oxygen Analyzer Part I: Control Unit
Teledyne Analytical Instruments
The digital concentration signal—along with input from the control
panel—is processed by the microprocessor, and appropriate control signals
are directed to the display, alarms and communications port as well as to the
gas control valves in the Analysis Unit.
The same digital information is also sent to a 12 bit digital to analog
converter that produces the 4-20 mA dc and the 0-1 V dc analog concentra-
tion signal outputs, and the analog range ID outputs.
The microprocessor monitors the power supply, and activates the
system failure alarm if a malfunction is detected.